Home / Industrial Doors / Sectional Doors / Optional parts

Optional parts

Built-in door

The inbuilt doors are installed as standard to the height of 4 door 'lamel' plates, of a standard width of 800mm (it is possible to change according to individual needs); the inbuilt door in the gate wing can be centred, on the right or the left (see reference) depending on the size of the doors.

Built-in door	IN THE CENTRE	LEFT	RIGHT

Side door

It is possible to furnish the industrial doors with a side door of the same type, of the same or different colour according to the RAL colour scheme.

CONTROL

The industrial door can be control:
a) by hand
• by means of extra rope; thanks to spring balancing system it is very easy
• by chain drive
b) motorial
• by means of the motor drive

Manual chain	Fixation of chain	Motor driven

CONTROL ELEMENTS

According to the type of the drive is possible to control the door by means of 2-key button, buttons on the cover of the control unit, remote control etc.

ELECTRO DRIVE

(it is not a condition; it is possible to control the door manually) if it is selected according to the nature of the operation and the size of the door wing. The electric drive can be installed on the right or left. The electric drive receives a signal for activation from the control unit. The control unit and control elements are located on the wall beside the door at a height of approximately 1.5m.

The door can be completed by security elements: protection of the lower edge and optical sensor.

Control of the drive is possible by any activation element (button, draw switch, induction loop and a series of other elements)

Closing systems

Galvanized socket	Socket for padlock	Double sided lock